Chalk and Cheese - Manual Winders

Discuss Christopher Ward watches
Post Reply
JAFO
Senior
Senior
Posts: 74
Joined: Wed Jul 15, 2020 3:59 pm

Chalk and Cheese - Manual Winders

Post by JAFO »

So I bought a Malvern 595 and then a Trident 65 in the sale. I have been sitting on the Trident for a couple of days, but I just decided to unwrap it, and get it going. I wasn't sure, because of the winding on the 595

The winding on the 595 is just so stiff. It only takes about 18 turns to fully wind it. I saw comments on here that maybe the gearing was too low, but saw other comments that the winding stem had actually just pulled out.

Whatever the cause, the winder on the 595 seemed unreasonably stiff, and I can quite see it breaking off or pulling away at some point. Anyway, I just tried the Trident 65, and it's completely different. Just smooth and gentle as I expected the 595 to be, as well as looking great too. It didn't take many more turns to fully wind, so I don't think it's a gearing issue with the 595.

I think I will raise a query with CW to see if my 595 is just a bad example, or whether they are all like that.

User avatar
Bahnstormer_vRS
Moderator
Moderator
Posts: 23317
Joined: Thu Sep 06, 2012 3:06 pm
CW-watches: 25
LE-two: 1
LE-three: 1
LE-foura: 1
LE-fourb: 1
LE-six: 1
LESeven: 1
Location: Hertfordshire, UK

Re: Chalk and Cheese - Manual Winders

Post by Bahnstormer_vRS »

Do you think the smaller crown on the 595 is influencing the apparent stiffness of winding?

That is to say, being smaller you have to exert a greater torque for the same winding effort of a larger crown.

Guy

Sent from my Xperia 5 using Tapatalk

C4&W7 BBMF| C5 BOB LE| C5 FLE| C7 MkI 47AD| C7 MkII Harrier| C8 MkI| C8 Reg MkII| C8 M2.04 LE| C8 PR
C9 FLE| C9 Me109 SPC LE| C11 Mak Navy| C20 FLE| C40 x2| C60 K'fisher| C60 FLE x2
C60 Apex| C60 Chrono P'type| C65 S'hurst| C65 GMT| C70 HRDC| C1000

User avatar
Amor Vincit Omnia
Moderator
Moderator
Posts: 22076
Joined: Sat Jun 11, 2011 7:34 pm
CW-watches: 4
Location: Norfolk, UK

Re: Chalk and Cheese - Manual Winders

Post by Amor Vincit Omnia »

This was my thought as well, Guy. However, I did take the liberty of winding one at the Bristol GTG last year (under the watchful eye of Declan, naturally!) and it didn’t seem particularly stiff.
Steve
The half minute which we daily devote to the winding-up of our watches is an exertion of labour almost insensible; yet, by the aid of a few wheels, its effect is spread over the whole twenty-four hours.
Charles Babbage


@Avo238

Post Reply