Does anyone know how is the insert attached to the bezel on the C60 ?

Discuss Christopher Ward watches
Post Reply
Blackdog
Junior
Junior
Posts: 38
Joined: Mon Jan 28, 2019 9:47 am
CW-watches: 2
Location: Netherlands

Does anyone know how is the insert attached to the bezel on the C60 ?

Post by Blackdog » Fri Jun 28, 2019 1:36 pm

Is it a snap-on attachment or is it glued with a double sided tape of some kind ?

The insert of my MK3 GMT is mis-aligned by a hair. If it is glued I could try to soften the glue with a hair dryer and re-align....

Andy-Smith
Newbie
Newbie
Posts: 27
Joined: Sun Sep 16, 2018 7:41 pm

Re: Does anyone know how is the insert attached to the bezel on the C60 ?

Post by Andy-Smith » Mon Jul 01, 2019 2:53 pm

My guess is that you would need to take the insert off and reapply. Trying to warm it up and turn it a bit will not work and it will just go back to minor misalignment. There appears to be very little information around on CW bezel removal/insert removal. Also remember that the insert is ceramic so will not bend much, it will crack.

Post Reply