Could anyone tell me the correct procedure to reset the chrono minute hand on an early Peregrine.
The watch is marked Swiss Movt, I believe a watch made in the UK but with a Swiss movement in , but I could be totally wrong.
SteveJC
C4 Peregrine Chrono setting
Re: C4 Peregrine Chrono setting
I presume what you are referring to is what the manual calls 'Adjusting the chronograph hands to zero position'?
According to the manual:
1. Unscrew crown and pull out to position 3 (furthest out) to initialise chronograph reset.
2. Press and hold down buttons A and B (start/stop and reset buttons) simultaneous for 2-3 seconds. The second hand will advance 5 seconds.
3. Adjusting the minute counter hand: Single step - short press of button B (reset button). Continuous - long press of button B.
According to the manual:
1. Unscrew crown and pull out to position 3 (furthest out) to initialise chronograph reset.
2. Press and hold down buttons A and B (start/stop and reset buttons) simultaneous for 2-3 seconds. The second hand will advance 5 seconds.
3. Adjusting the minute counter hand: Single step - short press of button B (reset button). Continuous - long press of button B.
- Amor Vincit Omnia
- Moderator
- Posts: 33790
- Joined: Sat Jun 11, 2011 7:34 pm
- CW-watches: 4
- Location: Norfolk, UK
Re: C4 Peregrine Chrono setting
You can download any CW manual here
Steve
Linguist; retired teacher; pilgrim; apprentice travel writer
Take nothing but pictures, leave nothing but footprints, kill nothing but time
Avoid loud and aggressive persons; they are vexatious to the spirit. (Max Ehrmann)
Linguist; retired teacher; pilgrim; apprentice travel writer
Take nothing but pictures, leave nothing but footprints, kill nothing but time
Avoid loud and aggressive persons; they are vexatious to the spirit. (Max Ehrmann)
Re: C4 Peregrine Chrono setting
The instructions given on the C4 manual at that link differ to the ones from my manual (given above). I didn't test them, but mine is the older Swiss mvmt version like the OP.
- Kip
- The Administrator
- Posts: 35171
- Joined: Tue Mar 13, 2007 8:45 pm
- CW-watches: 150
- LE-one: yes
- LE-two: yes
- LE-three: yes
- LE-foura: yes
- LE-fourb: yes
- LE-five: yes
- LE-six: yes
- LESeven: yes
- Location: New Hampshire, USA
Re: C4 Peregrine Chrono setting
The early Swiss movement C4's reset differently than the Swiss made ones despite being the same movement.
See post here.
See post here.
Kip
"Asylum Administrator"
Visit the CWArchives for everything CW. Historical, specs, manuals and resale. It is all there.
"Asylum Administrator"
Visit the CWArchives for everything CW. Historical, specs, manuals and resale. It is all there.
-
- Senior
- Posts: 137
- Joined: Fri May 31, 2013 11:09 pm
- CW-watches: 30
- Location: Stourbridge, West midlands
Re: C4 Peregrine Chrono setting
Thanks all, completely forgot about this , will reset watch this evening .
SteveJC
SteveJC
New Member of the C80 Owners Club
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 212 Views
-
Last post by JAFO
-
- 2 Replies
- 380 Views
-
Last post by Matteocrossista